Spring is a countermarche loom available in 90 cm (35 3/8") and 110 cm (43 1/4") weaving width. The loom can be ordered with eight or twelve harnesses. The warp beam is held by a friction brake, enabling you to advance the fabric sitting at your loom. The beater is adjustable in height. the Spring is made of lacquered beech and the design of the loom includes a built-in raddle on top of the castle and a storage shelf as well as the following included items: a stainless steel reed 40-10 (metric) 800/1200 Texsolv heddles (392 mm) tie-up and lease sticks sixteen warp sticks. Louet Continues to innovate and improve our products. The Spring and Delta looms have long had a challenge when trying to change heddles (add or remove). The new click lock system allows a user to easily add and remove heddles. These are standard on all Spring and Delta looms. We also offer a conversion kit for older Spring looms. The new Spring II makes the weaving action even more ergonomic and comfortable: ? You can advance more fabric in one movement of the handle, due to a new magnet. ? The brake disc of the warp beam acts as a crank, with a handle that turns in the disk. ? The shafts move more easily, as rollers with ball bearings have replaced the nylon rollers. ? The beater movement has a larger radius and improved arc due to longer uprights and a lowered hinge point. ? Clamps that aid in warping the loom, as well as warping instructions, are now included. The new Spring II has features that makes your loom easier to use and customize: ? The shaft bars can be easily clicked in and out of hooks that remain fastened to the cords, allowing you to easily add or remove heddles. This design also prevents you from inadvertently reattaching the shaft bars to the cords in the incorrect place. The shaft bars are also easier to reach due to smaller middle posts and modified main upright shaping. ? The warp beam now has room for 4 sectional warp rails (compared to 3), which are also easier to attach if you expand your loom. Dimensions (wxdxh): Spring 90 - 125 x 94 x 116 cm (48" x 37" x 45 1/2") Spring 110 - 145 x 94 x 116 cm (55" x 37" x 45 1/2") Weight: Spring 90 - 70 kg (150 lb) Spring 110 - 80 kg (165 lb) add 5.5 kg (12 lb) for an extension set. Available Accessories for purchase separately: Extension set of four harnesses and four treadles Bench - height 57 cm (22 3/8") Second warp beam with back beam (separate for Spring I and Spring II) Sectional warp beam (separate for Spring I and Spring II) Flying Dutchman shuttle Fly shuttle device (separate for Spring I and Spring II).
